Anchoring Clamp, Wedge Type Tension Clamp Supplier
Anchoring Clamp
Wedge-type tension clamp is also called an anchoring clamp. The tensioning provides the advantage of anchor and spiral clamps, these anchoring tension fasteners are mounted on a bend with the beginning and end of the route with the different intermediate points of greater length where it is feasible to stretch.
These wedge-type tension clamps are high in strength, fixation reliability, compactness, and ease of use and have a good installation speed. Also, these clamps are capable of securing cables with a diameter of 5-7 mm.
The installation of optical wire is carried out using a suspended installation method, while the hinge is used to install brackets, hooks, or traverses.
The body of the clamp loop is molded plastic and polymer wedges and made up of hot-dip galvanized steel wire.
As a professional manufacturer, supplier, and exporter, Rax Industry can support all sizes of Anchoring Clamps, We can also customize them according to your designs.
FEATURES OF ANCHORING CLAMP:
This clamping tool has budget modification
Made up of durable plastic, this clamp is resistant to high temperature and UV radiation
To provide additional ease of installation the fixing loop is made up of hot-dip galvanized steel wire
The clip is provided with a retainer for ease of use
There is no requirement for special tools for the installation of the clamp
The plastic of the clamp loop is strong and can withstand frost.
Get Free Quote
5 Advantages You Need to Know About Round Pole Clamps
5 Advantages You Need to Know About Round Pole Clamps
Industry News 2021-04-8
When you need to connect some accessories to any pole or tower, you need round pole clamps. The fixing used for the purpose of the connection is known as an immobility clamp. These clamps are divided into different categories. The primary division of immobility clamps is the immobility clamp for the pole and the immobility clamp for the tower. The immobility clamps used for the tower use a metal clamp, while the immobility clamp used for poles uses a hoop.
To fit accessories on the tower, we use two types of clamps: straight clamp (used on the tangent tower) and tension clamp (used for angle tower or terminal tower to provide suspension point for ADSS cable). On the other hand, if we have to connect any accessory to a pole, we use hoops. Hoops are used to fixing helical dead-end and helical suspension set on the pole to provide suspension point on ADSS cable.
Characteristics of Round pole clamps
Theround pole clamps are made up of galvanized steel specifically designed to be durable and stable. Galvanized steel is a solid material that is also very resistant to rust, corrosion, and shocks. Round pole clamps are extensively used for fitting purposes. They offer numerous benefits, but this article will summarize the top 5 benefits.
1.High strength
The round pole clamps are very durable. Being made up of hot-dip galvanized steel, it is very stable, and it can hold heavy accessories easily. It can also withstand substantial shocks.
2.Strong grip
Round pole cable has a firm grip that can quickly fix accessories on to pole or tower. There is no risk of slippage due to the tight grip or handle of the round pole clamps.
3.High resistance
The round pole clamps are made up of galvanized steel, which is very resistant to rusting and corrosion. Hence with this high level of resistance, it is fit for every location and every climatic condition.
4.Simple and easy installation
Fixing a cable immobility clamp is very simple and straightforward. It doesn’t require any sophisticated tool and expertise. It can be easily installed in a short time.
5.Versatility of applications
The round pole clamps are designed to meet your needs. It comes in different shapes and sizes. The size of the clamp can easily be adjusted by turning the screws.
Along with these benefits, round pole clamps can yield many other benefits, such as superior performance, longer life span, high efficiency, less requirement for care and maintenance, etc.
We have introduced the round pole clamps and have stated the benefits it can offer you. It can revolutionize your operations and help you manage and mount various accessories on towers and poles easily. Suppose you are interested in buying cable holder clip. Then let me tell you why you should choose Henvcon as your number dealer.
Why Henvcon?
Henvcon is a pioneer in the manufacturing and supplying of power cables and other wire accessories. The following are some of the reasons behind choosing Henvcon.
l High quality of products
Our high-quality goods have been thoroughly tested, and their advantages have been shown. Our loyal consumers testify to the excellent quality of our goods. Our cutting-edge technology can suit your need and get you the most up-to-date solution.
l Professionalism
Henvcon has knowledgeable and competent research and development unit. For our customers, we have the best leading personalized services in wholesale electric cables and wire fittings.
l Experience
Henvcon has experience of more than seven years, we have devised solutions for a wide range of fields, such as power, telecommunications, railway, etc. In this time, we have worked with a lot of companies and clients from different parts of the world.
l Wide range of products
We deal in many products, including Guy Grip, Suspension Clamp, Link Fittings, Helical Accessories, Railway Fittings, PVC Products, to name a few.
We believe in the importance of customer satisfaction, and we have many success stories. We think that we have the solution for all your problems. Tell us your requirements. We will provide you with the most innovative solution.
Helical Dead End Clamps for Short Span ADSS Cable Manufacturer, Supplier
1.Description:
A. Connecting with pole tower by splicing fittings such as thimble ,the outer stranded wires mainly bear line load.
B. As force transmission units,the inner stranded wires can Partially protect ADSS cable,the main functions include:
(1) Effectively deliver vertical pressing force to aramid fiber, the tension force bear unit of cable,as to protect cable sheath from damaging for overstress.
(2) Deliver axial tension force.
(3) Larger contact area with cable,even stress distribution,no stress concentration point.
C. In the premise of less than ADSS cable side pressure, it has some grip strength, can bear a certain amount of tension.
D.The guy grip strength for ADSS is 100% of cable ultimate tensile strength (UTS),which completely accords with optical cable erection need.
E.To meet the needs of setting up ADSS cable in 10KV city network's distribution line,we produce tension clamp of 15kN grip strength, which has advantages of simple structure,easy installation and low cost.
Specifications:
Preformed guy grip is used in the installation of the exposed conductor also used in electric network transmission and distribution and overhead insulated conductor. The reliability and economic advantage is better than the present bolt type and hydraulic compression type Tension Set which now is being widely used in the line.The structure of the Preformed Tension Set is simple , and the pipe structure formed by the two legs of the preformed line would enlace the conductor naturely and would produce a great holding strength. The novel structure and exact design all contribute to the reliability of the conductor tension set.The set is usually made of concentric-lay-stranded Aluminium-clad steel conductors ,galvanized iron wire strands and other materials.
2.Competitive Advantage:
1) The preformed guy grip is able to endure the high intension and grip strength. The grip strength of clamp is not less than 100% CUTS.
2) The preformed guy grip distributing the stress uniformity, improved ability of aseismatic without any damage on conductor..So that extended the using life of the conductor.
3) It bears the excellence of easy installation and construction, Shorted the working time. Operated this clamp by one person and need the special tool.
4) Easy to guarantee the quality of installation, inspectioned by optic view without special trainning.
5) Prefect corrosion resistance; The same material with conductor promiss that the clamp owned excellent ability of electrochemistry corrosion resistance
GUY-GRIP Dead-ends, installed at the top, the breaker and the anchor, provide today’s most effective method for securing guy strand. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. The GUY-GRIP Dead-end was the first to offer the cabled loop, a feature that provides more durability, easier tensioning and adaptability to multiple guying.
GUY-GRIP Dead-ends are made of the same material as the strand to which they are applied. They should be used on hardware that is held in a fixed position. The fitting should not be allowed to rotate or spin about the axis of the strand.
They should not be used as tools including come-alongs,pulling-in grips, etc.
NOMENCLATURE
Cross-over Marks:
(A)—Indicates starting point for application on smaller
diameter fittings.
(B)—Indicates alternate starting point for application on
larger diameter fittings.
Cabled Loop: Furnished as standard, all sizes.
Pitch Length: One complete wrap.
Short Leg-Long Leg: Identifies rods belonging to each
leg, after application.
Color Code and Length: Assists in identification of
strand size, corresponding to tabular information appearing
on price page.
Identification Tape: Shows catalog number, nominal sizes.
3.Material
It is produced by galvanized steel wire and aluminum steel wire
Specification of short span dead end for ADSS cable TYPE
Available Dia.of Cable (mm)
Length of dead end Component(mm)
Ref.Weight(kg)FittingANL015/09509.0-9.58400.5U-7ANL015/10509.6-10.58400.5U-7ANL015/116010.6-11.69100.5U-7ANL015/128011.7-12.89500.7U-7ANL015/141012.9-14.110700.8U-7ANL015/156014.2-15.611501.2U-7ANL015/170015.7-17.011501.2U-7
4.Packing and shipping
Packaging: preformed guy grip according to the concrete product cartons,wooden cases (as customer's requirements)
Delivery: usually,it will take about two weeks for the order of 100000sets for production
